How to maintain the injection mold
Injection molds are indispensable equipment for the production of various industrial products. They are currently used in many fields, such as machinery, electronics, aerospace, plastic products and automobiles. It is very important to maintain the maintenance of injection molds. Today The injection mold manufacturer will give you a detailed introduction to how to maintain the injection mold.
First of all, the injection mold manufacturer should provide a resume card for each pair of molds, detailing its use, care and damage, etc., including cleaning, lubrication and rust prevention, so that you can quickly learn which components or It is the damage of the parts, the degree of wear and tear, the degree of wear, improve the information basis for discovering and solving problems in the future, and also record the materials used for mold forming, process parameters, etc., which can shorten the test time and improve the work. effectiveness.
Secondly, in the case of normal operation of the injection molding machine and the mold, the injection mold manufacturer should test the various properties of the mold, and measure the size of the final molded plastic part, so that the existing state of the mold can be determined, and the cooling system can be found. The cause of damage such as the profile, etc., thereby judging the degree of damage of the mold and the measures that need to be repaired.
Finally, we must pay attention to the surface maintenance of the mold. Its surface directly affects the surface quality of the product. The key point is to do a good job of rust prevention. Choose a high quality, suitable and professional rust preventive oil. If rust spots caused by corrosive injection molding are found, use a grinder to polish and then apply anti-rust oil.
When cleaning the injection mold, you can refer to the above, but do not use hard steel or wire and other hard items to clean the residual injection molding, so it is easy to scratch its surface. At the same time, the injection mold manufacturer must carry out key tracking and inspection on several important parts of the mold. If problems are found, they should be dealt with in time.